ioBanana - Support (up to v20)

[neoxed]

site rank
200-Usage: SITE RANK <type> <user> [sections <sections#>]
200-       SITE RANK <type> =<group> [sections <sections#>]
200-       SITE RANK <type> #<x> [sections <sections#>]
200-       <type>: AllUp,Alldn,MonthUp,MonthDn,WkUp,WkDn,DayUp,DayDn
200-       sections: space-separated sections numbers to include or exclude (0-9)
200-       sections definition MUST end with either !* or *
200-       sections examples: "!0 !2 *" or "0 1 2 3 !*"
550 Command failed.

site rank allup test
200-test@Test is #6 with 0.0 KB
550 Command failed.

While playing around with v20-RC2b, I noticed some odd things with reply codes. Just in case no one had noticed.

[Harm]

Confirmed, thanks for letting me know.
This is fixed (along with a few other reply codes).
v20rc3 will also have a better usage of !buffer.

I have just tested the custom message window name support and it works just fine. It will be in rc3 too.

[PopWeasel]

ioBanana 19 free adds "!buffer on" to end of output when doing SITE NFO. Is this a known bug? Any way to fix this? Please dont tell me to use latest version, I'm setting this up for a friend. Unless there's a newer free version he should be using. Thanks.

[PopWeasel]

Doesn't do it for every nfo..weird.

[PopWeasel]

Doesn't this need to be added to readme.txt:

Step 5. Add those to your ioFTPD.ini:
...
[FTP_Custom_Commands]
...
rescan     = EXEC ..\scripts\ioBanana.exe rescan
rescanall     = EXEC ..\scripts\ioBanana.exe rescan all
...

Because at the end of Step 5. it says:

Also, remove rescan and rescanall from ioA.

I just noticed this and maybe it's why ioBanana rescanall never worked for me - on earlier version of ioBanana I had to uncomment the rescanall cmd for ioA to get that cmd to work. Anyways maybe posting here can help someone. Cheers.

Edit0: Ok I just noticed it works without rescanall if you do "site rescan all". hehe

Edit1: hmm, actually it looks like it does "site rescanall" every time you do "site rescan" .. so even when you just need to rescan one file like "site rescan our-relz.r19" it scans whole relz which uses cpu cycles of course. Is there supposed to be any differrence between rescan and rescanall? Thanks for any insights..

[Harm]

No, this doesn't need to be added to the readme because it's not how it works.
If you want to use ioA rescan/rescanall, don't use ioBanana rescan.

For ioBanana, SITE RESCAN rescans the whole dir and SITE RESCAN <file> rescans the specified file and displays current valid/bad files WITHOUT doing any crc-check on them if they were good. Your precious cpu cycles are safe

[PopWeasel]

Ok that was different from what I was used to with other scripts so thanks for clearing that up.

[Timpa]

Iv downloaded ioBanana 1.9...
Im useing a new version of ioFTPD...
And the latest version of ioA.

In the reademe for ioBanana beta versions, it says thats beta versions is timebombed. And i realy don´t wanna make this settings once again so i downloaded the older version 1.9.

In the readme it says....

Step 6. Change ioa.cfg:
========================================
Use_Execute_on_Pre=1
Execute_on_Pre_Path=c:\ioFTPD\scripts\ioBanana.exe imdbpre
========================================

also in ioa.cfg:
========================================
Log_New_Date="%vfs" "%area" "%desc" "%phys"
Log_PRE="%user" "%group" "%type" "%vfs" "%desc" "%mb" "%files" "%release"
Log_Give="%user" "%group" "%mb" "%target"
Log_Take="%user" "%group" "%mb" "%target"
Log_Wipe="%vfs" "%release" "%user" "%group" "%files" "%dirs" "%mb"
Log_Invite="%user" "%group" "%ircnick"
Log_Request="%user" "%group" "%request"
Log_Reqfilled="%user" "%group" "%request"
Log_Reqdel="%user" "%group" "%request"
Log_Nuke="%vfs" "%user" "%group" "%nukee" "%nukeegroup" "%multi" "%size" "%reason"
Log_UnNuke="%vfs" "%user" "%group" "%nukee" "%nukeegroup" "%multi" "%size" "%reason"
========================================

But i can´t find any of those vars/settings in ioa.cfg

what should i do?

Regards

[Harm]

http://www.ioftpd.com/board/showthre...4418#post14418

Note: it's 19 not 1.9.

[Timpa]

Thanx...
One more question...

when i write

!bartbw in "the" IRC channel, i only get:
[21:40] <+bart> -:: bandwidth ::- Up: @kBps - Dn: @kBps - Total: @kBps


nothing else... Why?


EDIT:


The same on this

[21:48] <Cleaver> !bartleechers
[21:48] <+bart> -:: leechers ::-
[21:48] <+bart> -:: Total: 0@0kBps ::-
[21:48] <Cleaver> !bartuploaders
[21:49] <+bart> -:: uploaders ::-
[21:49] <+bart> -:: Total: 0@0kBps ::-



There is users online downloading and uploading..


sitebot user in io has flag 1
should i set 1M ??

!bartwho works.... and som other commands

[Harm]

Read the other posts in the thread i've pasted, it's there for a reason (a good one even).

[Timpa]

Thanx again. It worked...
I just forgot that i had ioFTPWHODLX.itcl installd and i did as it was writen in the post..

But now one problem remains...

I am master on my site and the bw command works.
But i get access denied when i use command "SITE WHO" via the ftp client.

I think i made something wrong first time i configed my server. I may have deleted something by mistake but i dunno what it was.

the only "who" i have in my ioFTPD.ini is:

who = @swho

and...

who = *

Exept some swho...

[panzerfaust]

is it just me, or does ioBv20pre5 have problems with the MKD command? it just times out on me, had to go back to rc4

[Harm]

It seems to be just you
Could you define 'problems' in your case and give a bit more details.

[panzerfaust]

i don't really know how to define them, but when i make a dir, it just says "MKD Dirname" and then nothing happens, eventually the session times out, doesnt matter if you are transfering a dir, or making it manually, still times out.