Can Not See Files on the FTP - Page 2

tal3152 · 03-10-2004, 07:41 PM

Soory for the delay, here it's:
All the Logs are from the same FTP server same IP

FlashFXP 2.2 976 BETA PORT=20

[R] Connecting to > IP=XXXXXXXXXXXXX=20
[R] Connected to
[R] 220-Serv-U FTP Server v5.0 for WinSock ready...
[R] 220-welcome to pl ftp
[R] 220
[R] USER
[R] 331 User name okay, need password.
[R] PASS (hidden)
[R] 230-welcome to
[R] 230-
[R] 230 User logged in, proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Extension supported
[R] CLNT
[R] MDTM
[R] MDTM YYYYMMDDHHMMSS[+-TZ];filename
[R] SIZE
[R] SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
[R] REST STREAM
[R] XCRC filename;start;end
[R] 211 End
[R] CLNT FlashFXP 2.2.976
[R] 200 Noted.
[R] PWD
[R] 257 "/" is current directory.
[R] TYPE A
[R] 200 Type set to A.
[R] PORT 198,168,1,1,4,2
[R] 200 PORT Command successful.
[R] LIST -al
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 426 Data connection closed, transfer aborted.
[R] List Error
[R] NOOP
[R] 200 Command okay.
[R] QUIT
[R] 221 Goodbye!
[R] Logged off:

FlashFXP 2.2 976 BETA PORT=21

[R] Connecting to > IP=XXXXXXXXXXXXX PORT=21
[R] Connected to
[R] 220 Serv-U FTP Server v5.0 for WinSock ready...
[R] USER
[R] 331 User name okay, need password.
[R] PASS (hidden)
[R] 230-welcome to FTP1 [ members section ]
[R] 230-
[R] 230-
[R] 230 User logged in, proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Extension supported
[R] CLNT
[R] MDTM
[R] MDTM YYYYMMDDHHMMSS[+-TZ];filename
[R] SIZE
[R] SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
[R] REST STREAM
[R] XCRC filename;start;end
[R] 211 End
[R] CLNT FlashFXP 2.2.976
[R] 200 Noted.
[R] CWD /
[R] 250 Directory changed to /
[R] PWD
[R] 257 "/" is current directory.
[R] TYPE A
[R] 200 Type set to A.
[R] PORT 192,168,1,73,4,3
[R] 200 PORT Command successful.
[R] LIST -al
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 226-Maximum disk quota limited to 45000000 kBytes
[R] Used disk quota 22375253 kBytes, available 22624746 kBytes
[R] 226 Transfer complete.
[R] List Complete: 881 bytes in 0.78 (0.86 KBps)
[R] QUIT
[R] 221 Goodbye!
[R] Logged off:

SmartFTP 1.0 Build 981 PORT=20

Resolving host name
Connecting to -> IP: XXXXXXXXXXXXXX PORT: 20
Connected to Time = 141ms
Socket connected waiting for login sequence.
220-Serv-U FTP Server v5.0 for WinSock ready...
220-welcome to
220
USER 331 User name okay, need password.
PASS (hidden)
230-welcome to
230-
230 User logged in, proceed.
SYST
215 UNIX Type: L8
FEAT
211-Extension supported
CLNT
MDTM
MDTM YYYYMMDDHHMMSS[+-TZ];filename
SIZE
SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
REST STREAM
XCRC filename;start;end
211 End
Detected Server Software: Serv-U 4.x
CLNT SmartFTP 1.0.981
200 Noted.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
Connecting IP Repeater "repeater.smartftp.com" ...
IP Repeater returned: "66.32.179.102"
PORT 66,32,179,102,4,0
200 PORT Command successful.
Opening data connection IP: 66.32.179.102 PORT: 1024.
LIST -aLT
150 Opening ASCII mode data connection for /bin/ls.
519 bytes received successfully. (519 B/s) (00:00:01).
226 Transfer complete.
NOOP
200 Command okay.
NOOP
200 Command okay.
QUIT
221 Goodbye!
Connection closed.
]

bigstar · 03-10-2004, 08:04 PM

Did you do this?

Options > Preferences > Connection Tab > Force Active Mode to use this IP

Check that and select "http://iplookup.flashfxp.com"

Based on your ftp session it doesn't look like you did.

tal3152 · 03-10-2004, 08:37 PM

Well, I did put the IP 66.32.179.102 on the Force Active Mode and guess what it's working great............GOOD JOB

Would you please explain why do I need to put this IP?
The IP that I did put was my gateway IP.

Also why I don't have to put it on PORT 21?

bigstar · 03-10-2004, 09:16 PM

Most NAT based modems/routers only monitor port 21 for the ftp protocol. NAT is short for Network Address Translation automatically corrects protocol problems created by using a modem/router.

If you have a dynamic IP address you'll need to use "http://iplookup.flashfxp.com" and not your IP address.