Loosing connection(s)

jsprowl · 01-13-2002, 11:28 PM

Sometimes if I am transferring from site to site, FlashFXP will loose connection to the site(s), but it thinks it's still connected. Is there a way to fix that? Maybee a suggestion for a future release could be an option to break the que after a certain length of time and then restart the que.

MxxCon · 01-14-2002, 01:31 AM

did you configure options, preferences, transfer tab?

bigstar · 01-14-2002, 03:25 AM

FlashFXP enables winsock keepalives, so if the connection is lost the keealive should detect it and cause the socket to close.

I've done some local tests with keepalives in the past and they appeared to work well. Perhaps the millage varries depending on your system configuration.

I don't think aborting the transfer after a set amount of time is a good idea. Let's see if we can figure out what causes the connection to be lost and why FlashFXP isn't being notified.

jsprowl · 01-14-2002, 07:39 AM

I had anti-idle turned off.

bigstar · 01-14-2002, 03:58 PM

keepalives & anti-idle are two different things.

jsprowl · 01-14-2002, 06:52 PM

Yea, hehe, I kinda thought so, after I posted the reply. I have a P3 500/256MB Ram running Windows XP and using a Realtek RTL8139 Family PCI Fast Ethernet NIC, and a Linksys BEFSR41 EtherFast 4-Port Cable / DSL Router .

jsprowl · 01-14-2002, 10:46 PM

http://www.flashfxp.org/~forum/showt...=&threadid=386

That thread there could explain what's happening to me, because I had transfered files from one site to my hd, then transfered them to the other site, and it would transfer a file, then the progress indicator would go to 0kb per sec, then it would disconnect then reconnect and resume the que, skipping the file it had transfered. But when I was transferring a file from site to site, FlashFXP didn't know that the file was completed and there was a ??? in the corner indicating it didn't know how much time was left on the transfer. Some sites seem to be like that. Most are ok though. Did you tweak the winsock keep-alives in the later version or something?

bigstar · 01-15-2002, 05:46 AM

When the connection is lost it can be caused by anything between you and the ftp server.

The post you reference is incorrect. There were no changes to address a problem like that because it's vague. There was a problem where FlashFXP would disconnect/reconnect between each file but that's totally different.

When FXPing a file if the data connection stalls, The server may time out and boot you off the server with no reason.

KeepAlives have been in-use as far back as I can remember. It's an on/off thing, Either it's on or it's off. FlashFXP in sures that it is on.

There are so many possiblities. The fact that very few people bring this problem up, leads me to believe it's either hardware/internet related. Over 1 million FlashFXP downloads last year alone