DNS-323 errors

[distracto]

Could someone tell me why when making an fxp transfer from my QNAP-410 to my DNS-323 i get this error?

[R] STOR Conan the Barbarian.mkv
[R] 150 Connecting to port 56295
[L] RETR Conan the Barbarian.mkv
[L] 550 Conan the Barbarian.mkv: Function not implemented
[L] ABOR
[L] 500 ÿôABOR not understood
[R] Connection lost: DNS-323

using the latest FlashFXP

thanks!

[MxxCon]

check permissions on your qnap to make sure that you are allowed to read that file.
also check that it actually supports FXP transfers.

[distracto]

yeah, qnap is fine for fxp transfers, and i can transfer the files through windows from qnap to 323, so i'm confused why i would get that sort of error in flash fxp. i just finished transferring about 250gigs of mp3s across from the qnap to the 323 with only a few hiccups, but not that error as if it doesnt recognize the RETR command... any other ideas?

thanks again

[MxxCon]

based on what you pasted Flashfxp is requesting a file but your qnap is replying with "function not implemented".
perhaps if you would've provided more of the session log it would show something else useful, but based on this information you should be looking into qnap for problems.

[distracto]

thanks for the reply, here is another log, i hope it helps. if the problem isnt with FlashFXP, thats fine - i just need to start somewhere

WinSock 2.0 -- OpenSSL 0.9.8i 15 Sep 2008
[R] Connecting to DNS-323 -> IP=192.168.0.104 PORT=21
[R] Connected to DNS-323
[R] 220---------- Welcome to Pure-FTPd [TLS] ----------
[R] 220-You are user number 1 of 10 allowed.
[R] 220-Local time is now 01:08. Server port: 21.
[R] 220-This server supports FXP transfers
[R] 220 You will be disconnected after 2 minutes of inactivity.
[R] USER james
[R] 331 User james OK. Password required
[R] PASS (hidden)
[R] 230 OK. Current restricted directory is /
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Extensions supported:
[R]  EPRT
[R]  IDLE
[R]  MDTM
[R]  SIZE
[R]  REST STREAM
[R]  MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
[R]  MLSD
[R]  ESTP
[R]  PASV
[R]  EPSV
[R]  SPSV
[R]  ESTA
[R]  AUTH TLS
[R]  PBSZ
[R]  PROT
[R] 211 End.
[R] PWD
[R] 257 "/" is your current location
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (192,168,0,104,217,27)
[R] Opening data connection IP: 192.168.0.104 PORT: 55579
[R] MLSD
[R] 150 Accepted data connection
[R] 226-Options: -l 
[R] 226 2 matches total
[R] List Complete: 214 bytes in 0.22 seconds (1.0 KB/s)
[R] CWD Movies
[R] 250 OK. Current directory is /Movies
[R] PWD
[R] 257 "/Movies" is your current location
[R] PASV
[R] 227 Entering Passive Mode (192,168,0,104,216,245)
[R] Opening data connection IP: 192.168.0.104 PORT: 55541
[R] MLSD
[R] 150 Accepted data connection
[R] 226-Options: -l 
[R] 226 1 matches total
[R] List Complete: 110 bytes in 0.05 seconds (2.3 KB/s)
[R] CWD !BACKUP
[R] 250 OK. Current directory is /Movies/!BACKUP
[R] PWD
[R] 257 "/Movies/!BACKUP" is your current location
[R] PASV
[R] 227 Entering Passive Mode (192,168,0,104,217,71)
[R] Opening data connection IP: 192.168.0.104 PORT: 55623
[R] MLSD
[R] 150 Accepted data connection
[R] 226-Options: -l 
[R] 226 0 matches total
[R] List Complete: 0 bytes in 0.08 seconds (0.0 KB/s)
[L] Connecting to QNAP -> IP=192.168.0.100 PORT=21
[L] Connected to QNAP
[L] 220 NASFTPD Turbo station 2.x 1.3.2e Server (ProFTPD) [192.168.0.100]
[L] USER admin
[L] 331 Password required for admin
[L] PASS (hidden)
[L] 230 User admin logged in
[L] SYST
[L] 215 UNIX Type: L8
[L] FEAT
[L] 211-Features:
[L]  MDTM
[L]  MFMT
[L]  UTF8
[L]  MFF modify;UNIX.group;UNIX.mode;
[L]  MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*;
[L]  LANG en-US*
[L]  REST STREAM
[L]  SIZE
[L] 211 End
[L] OPTS UTF8 ON
[L] 200 UTF8 set to on
[L] PWD
[L] 257 "/" is the current directory
[L] TYPE A
[L] 200 Type set to A
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,220,118).
[L] Opening data connection IP: 192.168.0.100 PORT: 56438
[L] MLSD
[L] 150 Opening ASCII mode data connection for MLSD
[L] 226 Transfer complete
[L] List Complete: 1 KB in 0.17 seconds (8.7 KB/s)
[L] CWD /eSATADisk1
[L] 250 CWD command successful
[L] PWD
[L] 257 "/eSATADisk1" is the current directory
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,219,168).
[L] Opening data connection IP: 192.168.0.100 PORT: 56232
[L] MLSD
[L] 150 Opening ASCII mode data connection for MLSD
[L] 226 Transfer complete
[L] List Complete: 357 bytes in 0.06 seconds (5.6 KB/s)
[L] CWD Backup Movies
[L] 250 CWD command successful
[L] PWD
[L] 257 "/eSATADisk1/Backup Movies" is the current directory
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,219,220).
[L] Opening data connection IP: 192.168.0.100 PORT: 56284
[L] MLSD
[L] 150 Opening ASCII mode data connection for MLSD
[L] 226 Transfer complete
[L] List Complete: 1 KB in 0.20 seconds (8.7 KB/s)
[L] CWD /eSATADisk1/Backup Movies/Earth
[L] 250 CWD command successful
[L] PWD
[L] 257 "/eSATADisk1/Backup Movies/Earth" is the current directory
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,217,84).
[L] Opening data connection IP: 192.168.0.100 PORT: 55636
[L] MLSD
[L] 150 Opening ASCII mode data connection for MLSD
[L] 226 Transfer complete
[L] List Complete: 1 KB in 0.13 seconds (9.5 KB/s)
[R] MKD /Movies/!BACKUP/Earth
[R] 257 "/Movies/!BACKUP/Earth" : The directory was successfully created
[R] CWD /Movies/!BACKUP/Earth
[R] 250 OK. Current directory is /Movies/!BACKUP/Earth
[R] PWD
[R] 257 "/Movies/!BACKUP/Earth" is your current location
[R] PASV
[R] 227 Entering Passive Mode (192,168,0,104,217,94)
[R] Opening data connection IP: 192.168.0.104 PORT: 55646
[R] MLSD
[R] 150 Accepted data connection
[R] 226-Options: -l 
[R] 226 0 matches total
[R] List Complete: 0 bytes in 0.06 seconds (0.0 KB/s)
[L] CWD /eSATADisk1/Backup Movies/Earth/.actors
[L] 250 CWD command successful
[L] PWD
[L] 257 "/eSATADisk1/Backup Movies/Earth/.actors" is the current directory
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,219,223).
[L] Opening data connection IP: 192.168.0.100 PORT: 56287
[L] MLSD
[L] 150 Opening ASCII mode data connection for MLSD
[L] 226 Transfer complete
[L] List Complete: 131 bytes in 0.14 seconds (0.9 KB/s)
[R] MKD /Movies/!BACKUP/Earth/.actors
[R] 257 "/Movies/!BACKUP/Earth/.actors" : The directory was successfully created
[R] CWD /Movies/!BACKUP/Earth/.actors
[R] 250 OK. Current directory is /Movies/!BACKUP/Earth/.actors
[R] PWD
[R] 257 "/Movies/!BACKUP/Earth/.actors" is your current location
[R] PASV
[R] 227 Entering Passive Mode (192,168,0,104,217,48)
[R] Opening data connection IP: 192.168.0.104 PORT: 55600
[R] MLSD
[R] 150 Accepted data connection
[R] 226-Options: -l 
[R] 226 0 matches total
[R] List Complete: 0 bytes in 0.05 seconds (0.0 KB/s)
[L] TYPE I
[L] 200 Type set to I
[R] TYPE I
[R] 200 TYPE is now 8-bit binary
[L] PASV
[L] 227 Entering Passive Mode (192,168,0,100,218,137).
[R] PORT 192,168,0,100,218,137
[R] 200-FXP transfer: from 192.168.0.101 to 192.168.0.100
[R] 200 PORT command successful
[R] STOR James_Earl_Jones.tbn
[R] 150 Connecting to port 55945
[L] RETR James_Earl_Jones.tbn
[L] 550 James_Earl_Jones.tbn: Function not implemented
[L] ABOR
[L] 500 ÿôABOR not understood
[R] Connection lost: DNS-323
[R] Transfer Failed!

[MxxCon]

yes, according to that log either qnap doesn't support fxp or there's something else going on, but it's definitely the 1st place you should start looking at.

[distracto]

thanks for your help, i will look into this elsewhere

also thanks for editing my post, i forgot about the code tag

cheers