Go Back   FlashFXP Forums > >

Frequently Asked Questions (FAQ) Answers to common questions, how to guides, and advanced configuration information.

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-29-2013, 11:07 AM   #1
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default How to setup FlashFXP to use Active Mode for file transfers

If your router supports FTP-NAT then its as simple as changing the Data Connection Mode setting located in the Site Manager on the Connection Tab to "Active Mode (PORT)"

Otherwise you have the joy of setting up port mapping on your router.

Each router is different and the software they use for administration varies quite a bit.

Not only does this make it extremely difficult to explain, there is no one size fits all solution.

You'll need to access your router via your web browser and log into the admin control panel, if you're not sure how to do this you may need to consult the manual or do some googling.

Once logged in you'll need to find the port forwarding section, which might be named something else; such as port mapping.

Now the FTP protocol requires multiple ports, as each connection requires a new port number, typically a good number is 1000, but some routers require you enter a single port number per rule and not a simple range of ports. In this case just enter as many as you can in sequential order.. 41000, 41001, 41002, etc.

Next you need to match the same port range defined on your router with FlashFXP, this is done via the Preference dialog under Connection > FTP

Check the box next to the Limit local port range option and enter the port range as defined in your router. i.e. 41000 to 45000.

Click the Apply button to save the changes.

Now connect to the FTP server, if everything is configured correctly the directory listing should appear.

If it doesn't you may need to check the following option Use the following custom IP address and select http://iplookup.flashfxp.com

Now try again, hopefully now everything is working for you.

But if it still doesn't work please contact us via the forums or support and we'll do our best to help you get it working.

Alternatively you could always ask/demand that your web hosting provider allow passive mode transfers and all of this can be avoided. If that's not an option see if they support SFTP, with SFTP this can be avoided because SFTP shares a single connection for commands and data.

Below are some screenshots as reference to help get you started.





Last edited by bigstar; 08-29-2013 at 11:13 AM.
bigstar is offline   Reply With Quote
Reply

Tags
flashfxp, ftp, port, router, sftp
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:25 AM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)