SFTP Not Working

I receive the following error when trying to connect over SFTP. Previous version of FXP works fine.

FlashFXP 4.3.0 (build 1936)
Support Forums http://forum.flashfxp.com
Winsock 2.2 -- OpenSSL 1.0.1e 11 Feb 2013
[R] Connecting to Home SFTP -> IP=192.168.2.10 PORT=****
[R] Connected to Home SFTP
[R] Host key algorithm ssh-RSA, size 2048 bits.
[R] Fingerprint (MD5): e9:ac:d2:61:a3:0b:22:e7:d3:f8:a9:21:05:fa:dc:24
[R] Key exchange: diffie-hellman-group14-sha1. Session encryption: aes256-ctr, MAC: hmac-sha1, compression: none.
[R] Auth Type: Password
[R] Authentication succeeded
[R] SSH Connection open
[R] Connection failed

Hello,

Thank you for your bug report.

What SFTP server software is the server running?

You indicate that the previous version worked, are you referring to FlashFXP v4.2.5 build 1813? If not which specific version/build worked for you.

The previous version that I know worked is 1932. However, when I installed 1932 over 1936 it still wouldn't work. I had to uninstall FlashFXP and then install 1932 and it worked. See below. I am connecting to a NAS drive so I believe it is using OpenSSH.

FlashFXP 4.3.0 (build 1932)
Support Forums http://forum.flashfxp.com
Winsock 2.2 -- OpenSSL 1.0.1d 5 Feb 2013

[R] Connecting to 192.168.2.10 -> IP=192.168.2.10 PORT=****
[R] Connected to 192.168.2.10
[R] Host key algorithm ssh-RSA, size 2048 bits.
[R] Fingerprint (MD5): e9:ac:d2:61:a3:0b:22:e7:d3:f8:a9:21:05:fa:dc:24
[R] Key exchange: diffie-hellman-group14-sha1. Session encryption: aes256-ctr, MAC: hmac-sha1, compression: none.
[R] Auth Type: Password
[R] Authentication succeeded
[R] SSH Connection open
[R] Connection established with OpenSSH_5.8p1-hpn13v11 (SFTP v3)
[R] SFTP Connection Ready
[R] Retrieving file list...
[R] List Complete: 761 bytes in 0.03 second (0.7 KB/s)

Well that's weird. I just installed 1936 over 1932 and it now works. I wonder if the issue is when you upgrade over a version that didn't have your new install process. Might want to look into that.

I'm really not sure, I don't see anything different between the working and non-working logs, It could be a not so obvious setting causing the failure but I can't think of anything.

It would be very interesting to compare the flashfxp.ini of the working vs the non-working and perhaps even the site profile stored in the sites.dat against each other to see what specific settings are different.

I don't think the new installer is a factor in this issue, as it doesn't touch the data files, however if you're installing into a shared vs per-user location your configuration files are stored in different locations.

The update installer uses the info from the current installation to simply update the flashfxp program files without changing any user data files or registry settings.