FlashFXP Forums - [Swe]Problem med D-link 604 & IoFTPD[Swe]

FlashFXP Forums (https://oss.azurewebsites.net/forum/)

- International Help (https://oss.azurewebsites.net/forum/ioftpd/ioftpd/ioftpd-beta/international-help/)

- - [Swe]Problem med D-link 604 & IoFTPD[Swe] (https://oss.azurewebsites.net/forum/ioftpd/ioftpd/ioftpd-beta/international-help/7873-swe-problem-med-d-link.html)

[Swe]Problem med D-link 604 & IoFTPD[Swe]

funka skit bra utan router men sÃ¥ fort jag kopplar in den sÃ¥ vill det sig inte

[Nat]
Host = 0.0.0.0
Ports = 20-150
Random = True
;Global_Inbound_Bandwidth = 10000
;Global_Outbound_Bandwidth = 10000
;Client_Inbound_Bandwidth = 100
;Client_Outbound_Bandwidth = 50
;Bind =192.168.0.106/81.229.85.251

[FTP_Service]
Type = FTP
Device_Name = Nat
Port = 21
Description = MPW Wrestling Dump
User_Limit = 10
Allowed_Users = *
Messages = ..\text\ftp

Host = routerns ip eller dns
Bind = ioftpd-datorns ip

har provat
Host = 81.229.85.251 <-- tilldelat av comhem
Bind = 192.168.0.106 <-- tilldelad av routern till nÃ¤tverkskortet

men kollar man status i routern stÃ¥r det 192.168.0.1

inget resultat funkade dock

192.168.0.1 Ã¤r routerns lan ip. InstÃ¤llningarna ska funka, men du mÃ¥ste skicka vidare (forward) alla portar som anvÃ¤nds till ioftpd-burken. I ditt fall port 21 och den porten -1, alltsÃ¥ 20 (dataport), men ocksÃ¥ dataportarna instÃ¤llda i ioftpd. Hade du satt t.ex. port 666 att koppla sig mot mÃ¥ste du forwarda 666 och 665.

Du har satt Ports = 20-150 som dataportar, det Ã¤r INTE bra. FÃ¶rst och frÃ¤mst Ã¤r det pÃ¥ tok fÃ¶r lÃ¥gt eftersom en massa tjÃ¤nster anvÃ¤nder portar under 1024. T.ex. FTP som ligger pÃ¥ port 21 (som du ocksÃ¥ verkar vilja anvÃ¤nda). Port 21 kan inte va porten (ftpkontrollkanalen) du kopplar dig mot samtidigt som det Ã¤r en dataport (20-150 som du satt). SÃ¤tt ports till nÃ¥t hÃ¶gre t.ex. uppÃ¥t 2-3000 och antalet ska vara ungefÃ¤r 50 portar per anvÃ¤ndare som ska va online (samtidigt).

tackar Ã¥ bugar ska testa det nÃ¤r ja kommer hem..

Funkade inte :O( fan blir tokig snart

Mja som jag rÃ¤knade sÃ¥ kan man bara forwarda en 20 portar pÃ¥ D-link 604. o bara enskilda portar inga ranges (som jag har kommit pÃ¥ iaf.) Det finns nÃ¥t som heter Special applications

Quote:

Special Applications
Some applications require multiple connections, like Internet games, video conferencing, Internet telephony and others. These applications have difficulties working with NAT (Network Address Translation). Special Applications allows some of these applications to work. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP (Transmission Control Protocol) or UDP (User Datagram Protocol), then enter the public ports associated with the trigger port to open them for inbound traffic. At the bottom of the screen, there are already defined well-known special applications. To use them, click on the edit icon and enable the service.

Name :This is the name referencing the special application.
Trigger Port :This is the port used to trigger the application. It can be either a single port or a range of ports.
Trigger Type :This is the protocol used to trigger the special application.
Public Port :This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges.
Public Type :This is the protocol used for the special application.

If the mechanism of Special Applications fails to make an application work, try using DMZ host instead.

NOTE: At any time, only one PC can use each Special Application.

Jag har personligen inte lyckats fÃ¥ det hela o funka utan jag har manuelt lagt till en 13 portar (dom enda jag hade kvar.) o satt dem som ports i ioFTPD. Det funkar nu men bara hjÃ¤lpligt.

Om nÃ¥n har nÃ¥n idefÃ¶r en lÃ¶sning sÃ¥ Ã¤r ni vÃ¤lkommna att hojta till