Problem FXPing to a certain site
 

Hello, I have a wierd problem, I have been able to fxp to all the ftp sites I have acess to, But one day, I turned on the WinXP Firewall for one night, And then the next day I turned if off, Now one of the FTP servers I normally fxp files to wont let me FXP files to it, While the rest of the ftp sites work in FXP, Just that one site doesnt seem to work, I checked with my friend about his server and he said he never touched anything on it, I use Bellsouth FastAccess DSL and have an internal DSL Modem, But heres the wierd part, When I connect to the net using a dialup 56k modem, the FXP transfers work on that FTP site, For some reason, That particular site will not FXP with the DSL connection, I think by turning on and off the firewall setting on XP Might have change something in the winXP settings for my DSL connection, So I tried removing and reinstalling the DSL Drivers, That didnt work, So far, I dont know whats wrong with it, Maybe someone can help?

System
P4 1.5Ghz
256MB Ram
Efficient Speedstream 3060 Internal DSL Modem
USB 56k Modem

Heres an edited version of the log of what I get.

WinSock 2.0
Connecting to Site
Connected to Site -> IP=xxxxxxxxxxx
220-Serv-U FTP Server v4.2 for WinSock ready...
220-======================================
220-Welcome To xxxxxxxxxx
220 ======================================
USER xxxx
331 User name okay, need password.
PASS (hidden)
230 User logged in, proceed.
SYST
215 UNIX Type: L8
Connecting to Site 4
Connected to Site 4 -> IP=xxxxxxxxxx
220 Serv-U FTP Server v5.0 for WinSock ready...
USER xxxxxx
331 User name okay, need password.
PASS (hidden)
230 User logged in, proceed.
SYST
215 UNIX Type: L8
CWD /xxxxxx
250 Directory changed to /xxxxxx
PWD
257 "/Upload" is current directory.
TYPE A
200 Type set to A.
PORT 65,9,231,104,18,72
200 PORT Command successful.
LIST
150 Opening ASCII mode data connection for /bin/ls.
226 Transfer complete.
List Complete: 753 bytes in 1.69 (0.43 KBps)
CWD /xxxxxxxxx
250 Directory changed to /xxxxxx
PWD
257 "/xxxxxxxxxxxxx" is current directory.
TYPE A
200 Type set to A.
PORT 65,9,231,104,18,73
200 PORT Command successful.
LIST
150 Opening ASCII mode data connection for /bin/ls.
226 Transfer complete.
List Complete: 611 bytes in 1.70 (0.35 KBps)
TYPE I
200 Type set to I.
TYPE I
200 Type set to I.
PASV

It always get stuck at PASV

Read this thread for information required from you before proper support can be given.