Go Back   FlashFXP Forums > > > >

International Help Get help in your native language (non-english).

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-18-2004, 04:03 PM   #1
TenPin
Junior Member
ioFTPD Foundation User
 
Join Date: Feb 2004
Posts: 13
Default [Swe]Problem med D-link 604 & IoFTPD[Swe]

funka skit bra utan router men så fort jag kopplar in den så vill det sig inte

[Nat]
Host = 0.0.0.0
Ports = 20-150
Random = True
;Global_Inbound_Bandwidth = 10000
;Global_Outbound_Bandwidth = 10000
;Client_Inbound_Bandwidth = 100
;Client_Outbound_Bandwidth = 50
;Bind =192.168.0.106/81.229.85.251


[FTP_Service]
Type = FTP
Device_Name = Nat
Port = 21
Description = MPW Wrestling Dump
User_Limit = 10
Allowed_Users = *
Messages = ..\text\ftp
TenPin is offline   Reply With Quote
Old 02-18-2004, 04:52 PM   #2
Zer0Racer
Senior Member
ioFTPD Scripter
 
Join Date: Oct 2002
Posts: 703
Default

Host = routerns ip eller dns
Bind = ioftpd-datorns ip
Zer0Racer is offline   Reply With Quote
Old 02-19-2004, 10:20 AM   #3
TenPin
Junior Member
ioFTPD Foundation User
 
Join Date: Feb 2004
Posts: 13
Default

har provat
Host = 81.229.85.251 <-- tilldelat av comhem
Bind = 192.168.0.106 <-- tilldelad av routern till nätverkskortet

men kollar man status i routern står det 192.168.0.1

inget resultat funkade dock
TenPin is offline   Reply With Quote
Old 02-19-2004, 12:14 PM   #4
Zer0Racer
Senior Member
ioFTPD Scripter
 
Join Date: Oct 2002
Posts: 703
Default

192.168.0.1 är routerns lan ip. Inställningarna ska funka, men du måste skicka vidare (forward) alla portar som används till ioftpd-burken. I ditt fall port 21 och den porten -1, alltså 20 (dataport), men också dataportarna inställda i ioftpd. Hade du satt t.ex. port 666 att koppla sig mot måste du forwarda 666 och 665.

Du har satt Ports = 20-150 som dataportar, det är INTE bra. Först och främst är det på tok för lågt eftersom en massa tjänster använder portar under 1024. T.ex. FTP som ligger på port 21 (som du också verkar vilja använda). Port 21 kan inte va porten (ftpkontrollkanalen) du kopplar dig mot samtidigt som det är en dataport (20-150 som du satt). Sätt ports till nåt högre t.ex. uppåt 2-3000 och antalet ska vara ungefär 50 portar per användare som ska va online (samtidigt).
Zer0Racer is offline   Reply With Quote
Old 02-19-2004, 12:26 PM   #5
TenPin
Junior Member
ioFTPD Foundation User
 
Join Date: Feb 2004
Posts: 13
Default

tackar å bugar ska testa det när ja kommer hem..
TenPin is offline   Reply With Quote
Old 02-20-2004, 07:40 AM   #6
TenPin
Junior Member
ioFTPD Foundation User
 
Join Date: Feb 2004
Posts: 13
Default

Funkade inte :O( fan blir tokig snart
TenPin is offline   Reply With Quote
Old 11-06-2004, 06:09 PM   #7
Emperor2000
Junior Member
FlashFXP Registered User
ioFTPD Foundation User
 
Join Date: Jun 2003
Posts: 5
Default

Mja som jag räknade så kan man bara forwarda en 20 portar på D-link 604. o bara enskilda portar inga ranges (som jag har kommit på iaf.) Det finns nåt som heter Special applications

Quote:
Special Applications
Some applications require multiple connections, like Internet games, video conferencing, Internet telephony and others. These applications have difficulties working with NAT (Network Address Translation). Special Applications allows some of these applications to work. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP (Transmission Control Protocol) or UDP (User Datagram Protocol), then enter the public ports associated with the trigger port to open them for inbound traffic. At the bottom of the screen, there are already defined well-known special applications. To use them, click on the edit icon and enable the service.

Name :This is the name referencing the special application.
Trigger Port :This is the port used to trigger the application. It can be either a single port or a range of ports.
Trigger Type :This is the protocol used to trigger the special application.
Public Port :This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges.
Public Type :This is the protocol used for the special application.

If the mechanism of Special Applications fails to make an application work, try using DMZ host instead.

NOTE: At any time, only one PC can use each Special Application.

Jag har personligen inte lyckats få det hela o funka utan jag har manuelt lagt till en 13 portar (dom enda jag hade kvar.) o satt dem som ports i ioFTPD. Det funkar nu men bara hjälpligt.

Om nån har nån ideför en lösning så är ni välkommna att hojta till
Emperor2000 is offline   Reply With Quote
Reply

Tags
10000, ;bind, ftp, type, [ftp_service]

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:09 AM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)