Go Back   FlashFXP Forums > > > >

General Discuss anything and everything related to FlashFXP

 
 
Thread Tools Display Modes
Old 07-02-2003, 06:11 PM   #1
neostar
Junior Member
 
Join Date: Jul 2003
Posts: 1
Question 425 cannot open data connection

hi,

first of all....thank you to passing by :-)

i have no firewall, there are no ports blocked on W2000, everything is working fine with a diffrent provider but not
with the provider where i am connected.

transfer problems are only with server to server, passive mode.
client server transfer are working.

i traced the frame...underneath you can see it, at the end you
can see the error message.

does everyone has an idear if that has something to do with
my provider ? does he block some ports ? and if yes how could i proof that he´s blocking some of them ?

any suggestion are very very very welcome

thks

best neostar


Frame 78 (96 bytes on wire, 96 bytes captured)
Arrival Time: Jul 2, 2003 23:31:12.867496000
Time delta from previous packet: 1.273124000 seconds
Time relative to first packet: 31.356948000 seconds
Frame Number: 78
Packet Length: 96 bytes
Capture Length: 96 bytes
Ethernet II, Src: 00:e0:18:e8:07:04, Dst: 00:90:39:74:00:4a
Destination: 00:90:39:74:00:4a (ShastaNe_74:00:4a)
Source: 00:e0:18:e8:07:04 (AsustekC_e8:07:04)
Type: PPPoE Session (0x8864)
PPP-over-Ethernet Session
Version: 1
Type: 1
Code: Session Data
Session ID: 07a9
Payload Length: 76
Point-to-Point Protocol
Protocol: IP (0x0021)
Internet Protocol, Src Addr: 82.82.146.43 (82.82.146.43), Dst Addr: 217.234.19.162 (217.234.19.162)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
0000 00.. = Differentiated Services Codepoint: Default (0x00)
.... ..0. = ECN-Capable Transport (ECT): 0
.... ...0 = ECN-CE: 0
Total Length: 74
Identification: 0xc82f (51247)
Flags: 0x04
.1.. = Don't fragment: Set
..0. = More fragments: Not set
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0x6074 (correct)
Source: 82.82.146.43 (82.82.146.43)
Destination: 217.234.19.162 (217.234.19.162)
Transmission Control Protocol, Src Port: ftp (21), Dst Port: 40220 (40220), Seq: 1582399881, Ack: 1525348053, Len: 34
Source port: ftp (21)
Destination port: 40220 (40220)
Sequence number: 1582399881
Next sequence number: 1582399915
Acknowledgement number: 1525348053
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgment: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 16981
Checksum: 0x23dd (correct)
File Transfer Protocol (FTP)
425 Cannot open data connection.
Response arg: Cannot open data connection.

Response code: Can't open data connection (425).
neostar is offline  
Old 07-02-2003, 06:34 PM   #2
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,881
Default

please read message board posting RULES
http://forum.flashfxp.com/showthread...&threadid=3078

it's nice that you can use network sniffer, but that huge copy/paste is pretty useless. we need to see timestamped and prefixed status log from flashfxp.
__________________
[Sig removed by Administrator: Signature can not exceed 20GB]
MxxCon is offline  
 

Tags
bytes, data, length, protocol, set

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
xbox connection problems BenArfa General Discussion 8 05-17-2005 11:50 PM
why do i get this error ? twisted General Discussion 0 05-02-2005 11:25 PM


All times are GMT -5. The time now is 06:22 AM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)