Go Back   FlashFXP Forums > > >

Bug Reports Report bugs here.

 
 
Thread Tools Display Modes
Old 09-27-2006, 12:16 AM   #1
Lemonadez
Junior Member
 
Join Date: Sep 2006
Posts: 2
Default ALways login while the file transfered

Ok I have 5 Files.

1 File
2 File
3 File
4 File
5 File

After the 1 File transfer it relog and then transfer the 2 File and then after it finish it will re-connect again and transfer 3 file and so on. (Its also the same as downloading) if you dont know what im talking about...

look at this log

Code:
[R] 227 Entering Passive Mode (64,72,116,195,253,235)
[R] Opening data connection IP: 64.72.116.195 PORT: 65003
[R] STOR stat3.gif
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.318 seconds (measured here), 330.47 bytes per second
Transferred: stat3.gif 105 bytes in 0.33 seconds (0.3 KB/s)
[R] TYPE I
[R] 200 TYPE is now 8-bit binary
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,243,142)
[R] Opening data connection IP: 64.72.116.195 PORT: 62350
[R] STOR stat4.gif
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.315 seconds (measured here), 330.67 bytes per second
Transferred: stat4.gif 104 bytes in 0.31 seconds (0.3 KB/s)
[R] CWD /1/templates/vista
[R] 250 OK. Current directory is /1/templates/vista
[R] PWD
[R] 257 "/1/templates/vista" is your current location
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,235,175)
[R] Opening data connection IP: 64.72.116.195 PORT: 60335
[R] STOR block.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.313 seconds (measured here), 0.66 Kbytes per second
Transferred: block.php 215 bytes in 0.33 seconds (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,251,254)
[R] Opening data connection IP: 64.72.116.195 PORT: 64510
[R] STOR footer.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.339 seconds (measured here), 3.74 Kbytes per second
Transferred: footer.php 1 KB in 0.36 seconds (3.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,252,70)
[R] Opening data connection IP: 64.72.116.195 PORT: 64582
[R] STOR header.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.645 seconds (measured here), 6.39 Kbytes per second
Transferred: header.php 4 KB in 0.66 seconds (6.4 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,240,199)
[R] Opening data connection IP: 64.72.116.195 PORT: 61639
[R] STOR id.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.788 seconds (measured here), 1.01 Kbytes per second
Transferred: id.php 841 bytes in 0.41 seconds (2.0 KB/s)
[R] CWD /1/templates/vista/extra
[R] 250 OK. Current directory is /1/templates/vista/extra
[R] PWD
[R] 257 "/1/templates/vista/extra" is your current location
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,252,108)
[R] Opening data connection IP: 64.72.116.195 PORT: 64620
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 0.66 seconds (1.1 KB/s)
Transfer queue completed
Transferred 142 files totaling 556 KB in 5 minutes 26 seconds (6.3 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,243,154)
[R] Opening data connection IP: 64.72.116.195 PORT: 62362
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.06 second (0.7 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,254,108)
[R] Opening data connection IP: 64.72.116.195 PORT: 65132
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,251,132)
[R] Opening data connection IP: 64.72.116.195 PORT: 64388
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,240,151)
[R] Opening data connection IP: 64.72.116.195 PORT: 61591
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.20 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,253,19)
[R] Opening data connection IP: 64.72.116.195 PORT: 64787
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.20 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,249,63)
[R] Opening data connection IP: 64.72.116.195 PORT: 63807
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,255,166)
[R] Opening data connection IP: 64.72.116.195 PORT: 65446
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l 
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.23 second (0.6 KB/s)
Look how many times it re-connect to the server after the file has been transfered. Not other FTP do this -.-
- WHat im trying to say is that those files are in Transfer Qeue (Ready to be transfer)How come it has to re-connect all the time? just take a look. It re-connect after file had been transfered -.- Isnt that wierd.

Try it and you will see it for yourself.

Last edited by Lemonadez; 09-27-2006 at 12:29 AM.
Lemonadez is offline  
Old 09-27-2006, 01:33 AM   #2
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

What you see in this log is the standard behavior for the FTP protocol. Each file transfer opens a new data connection. The command connection remains open throughout this whole process.
bigstar is offline  
Old 09-27-2006, 03:03 AM   #3
Lemonadez
Junior Member
 
Join Date: Sep 2006
Posts: 2
Default

Quote:
Originally Posted by bigstar
What you see in this log is the standard behavior for the FTP protocol. Each file transfer opens a new data connection. The command connection remains open throughout this whole process.

There a limit Connection on the FTP Server.
- After 1 file have been finish transfering. It will re-connect again just to transfer the 2nd file at that time. I cant do anything cuz The FTP server is full. I think that gay everytime we transfer each file will open a new connection? I see on other FTP client they dont open any new connection just to transfer multiple files they just stay connected.


I try it on other FTP client
- It didnt open any new connection just to transfer 5 files (1 file had been transfered then it goes to 2nd file) It doesnt have to do re-connect (New connection) just to transfer the 2nd file.
Lemonadez is offline  
Old 09-27-2006, 03:55 AM   #4
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

The ftp session log you posted doesn't show anything close to what you're telling me. The control connection is never lost, disconnected, or even re-connected and that would be clearly shown in the session log. Data connections don't count towards the connection limit.

The FTP protocol consists of two connections.
1. The control channel which is always connected and it's used to send commands to the ftp server.
2. The data channel which is only used for data transfers (files or listings), a new data channel is established for each and every request, but only one data channel is open at any given time.
bigstar is offline  
 

Tags
connection, data, ftp, type, [r]

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 AM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)