PDA

View Full Version : AcceptEx error

darkone
10-16-2003, 12:59 AM
http://support.microsoft.com/?kbid=325487

Issue caused by switch/NIC/router/dhcp :)
bounty
10-16-2003, 06:46 AM
ehehe nice link ;)

so please stop to always blame ioftpd or d1 when you have problems ;)

have fun
bounty
Stardog
10-16-2003, 11:42 AM
It is sometimes difficult to tell if errors are something from a new release of ioFTPD, or if they are errors that always existed and ioFTPD is just now logging them.

I will say this, if you use cheap $12 NICs, the drivers are usually worth $.05...Do yourself a favor and spend a little more for the better NIC...Some of those D-Link or Realtek cards really suck.
dasOp
10-16-2003, 04:34 PM
Just a little comment: the system error "The network name was not found" when AcceptEx fails is not really an error as far as the user is concerned and prolly shouldnt even be in the logs.
The semaphore-bla error is so rare I have yet to see a case on any app where it doesnt have to do with faulty hw or poor drivers. So take d1's word for it. ;)
thewarden
10-17-2003, 02:14 AM
Originally posted by StarDog
Some of those D-Link or Realtek cards really suck.

:)

So do some of the 3COM 10\100 cards...and the 10/100/1000 ones...

now - ever try the 10\100\1000 nic cards ? That is a horror story itself.

I'll wait for true fiber optics line over cat5e or 6 copper as why
bother when the limits are 1\2 of what the nic card can do...talk
about a bottle neck...I can take down any 1000 setup in less
than 5 minutes...so, here we go again...I'll wait until the 3rd or
4th generation is out...

So, a nic is a nic is not a nic...

TW
megauser
10-18-2003, 01:56 AM
10-16-2003 11:36:52 AcceptEx() failed with error: 121

This is with version 5.1.14r

2k3 server with 1gig ram
gige Nic (netgear)
10/100 nic (3com)

not sure what the error means, but its the 2nd time tonight.. Im going back to 5.1.8r

it was the most stable

Megauser
ADDiCT
10-18-2003, 02:47 AM
5.1.8 has the same errors ... only they don't get logged :)
darkone
10-18-2003, 05:08 AM
Yep.. that's true
EwarWoo
10-18-2003, 06:54 AM
Originally posted by megauser
10-16-2003 11:36:52 AcceptEx() failed with error: 121
...not sure what the error means, but its the 2nd time tonight.. Im going back to 5.1.8r...it was the most stable

LMFAO.
You actually read any of the thread you're posting in? Would guess not :)
try reading the thread, is all explained. But then I'd guess you wont be reading this reply ;)
MidasKing
11-20-2003, 05:03 AM
Originally posted by darkone
http://support.microsoft.com/?kbid=325487

Issue caused by switch/NIC/router/dhcp :)

Sorry Dark0n3...

But, How I can correct the problem? :(

and this other:

11-20-2003 04:19:37 AcceptEx() failed with error: 64

I,m using version 5.3.5r

Thanks for your help....
darkone
11-20-2003, 05:10 AM
It isn't really a problem.. unless your daemon stops responding :) (when that error comes in, io creates new socket & reissues AcceptEx call)
MidasKing
11-20-2003, 05:10 AM
Complementing...

Until versao 5,2,15 this problem never occurred and the hardware did not suffer any alteration...


:(
darkone
11-20-2003, 05:15 AM
This was added in some 5.x.x version.. since some people were having odd problems