View Full Version : 4.9.0 - Bug reports in this thread
darkone
05-25-2003, 05:32 PM
[+] CHANGE <user> FLAGS <new flags> removes all flags (except M) from user without setting <new flags>. Status: FIXED
[+] Who incorrectly reports all users as idle. Status: FIXED
[-] FTP/HTTP service does not start. Solution: Install proper certificate, or disable config line that specified certificate
[+] Overwriting does not work. Status: FIXED
[+] Cookies did not work properly as script parameters. Status: FIXED
[+] Process exit code (external scripts) read wrong. Status: FIXED
[+] Mode 0777L was incorrectly translated to 0 on !vfs:add. Status: FIXED
Q3aiml
05-25-2003, 11:11 PM
Seems io doesn't want to overwrite files at all :(
STOR admin.vfs
550 admin.vfs: No error
Transfer Failed!
Always same error, tried with other files aswell...
Giant
05-25-2003, 11:55 PM
530 Error reading VFS file: No error.
When the vfs contains a wrong / dir.
Mebe not a bug but perhaps something a bit more clear then no error should be displayed.
Q3aiml
05-26-2003, 12:15 AM
There seems to be some corruption occuring when using the % before filename option to parse cookies. In the ini under Post I have:
mkd =%test.exe MKD %[$user]|%[$group]|%[$pwd]|
That is parsed fine and passes, as an example
MKD ioFTPD|ioftpd|/ioFTPD/system/|
(Newline)
MKD test.dir
With what would normally be passed on the command line sent after a newline and a space. At first it seemed fine but then it started sending semi-random stuff after the newline, with the rest still coming after it without any cut off.
A few examples...
MKD ioFTPD|ioftpd|/ioFTPD/system/|
unters MKD gggggggggggggg
MKD ioFTPD|ioftpd|/ioFTPD/system/|
msg MKD hh
MKD ioFTPD|ioftpd|/ioFTPD/system/|
oFTPD MKD hohumhohum
- For the rest the format was, without the ending |:
mkd =%test.exe MKD %[$user]|%[$group]|%[$pwd]
MKD ioFTPD|ioftpd|/ioFTPD/system/
rnal MKD 30l0skgg
MKD ioFTPD|ioftpd|/ioFTPD/system/
ioFTPD\system\hello MKD hello
MKD ioFTPD|ioftpd|/h/
%[$pwd MKD yeah
MKD ioFTPD|ioftpd|/h/
%[$pwd MKD yeaaahhh
darkone
05-26-2003, 03:30 AM
I will check this.. sounds like there could be bug in my string 'concat' algorithm :)
Flare2
05-26-2003, 07:19 AM
BLARGH! :D
Yeah, had the certificate bug myself.
Riddlah
05-26-2003, 08:27 AM
When I'm doing a !speed command it says that the user is not logged in alltho he is and uploading like crazy. But maybe this is connected with the !who command reporting all as idle.
When doing a site who or a !who in channel it reports him as online but idle as stated above.
darkone
05-26-2003, 08:42 AM
Already listed (& fixed) :)
MidKnight
05-26-2003, 10:29 AM
[-] FTP/HTTP service does not start. Solution: Install proper certificate, or disable config line that specified certificate
im having this problem. i have installed the new cert correctly (i think), but it io wont run, but if i use ; on the cert name in ini, io will start to work. any ideas?
darkone
05-26-2003, 11:00 AM
Make sure that certificate name in config matches with the one that certificate manager shows.. (& that certificate type is: Server Authentication)
MidKnight
05-26-2003, 11:26 AM
no stats seem to be working at all. im not using the new line nostats in the ini either?
darkone
05-26-2003, 11:42 AM
NoStats must be defined.. otherwise stats aren't recorded :)
NoStats = * !*
MidKnight
05-26-2003, 11:47 AM
yep i had it to begin with, and have it back in as you have it written, but still nothing. what there be any problems because i use other stat message files?
darkone
05-26-2003, 12:18 PM
Shouldn't be
MidKnight
05-26-2003, 08:04 PM
darkone i put the latest version you sent out this morning, and the stats are working again. but something else that was a problem and still is, if site who is run, the dir list still says
p: /
no matter where a user is
darkone
05-26-2003, 08:08 PM
I'm aware of that.. I asked guys on channel, wheter it was ok to leave as is, until I have time to rewrite damn thing (who), and noone had anything against it.
MidKnight
05-26-2003, 08:10 PM
ok np, i also just notice its working backwards, like a user downloading, the total upload speed is actually the download speed
darkone
05-26-2003, 08:16 PM
Isn't that neat ;p
Lunatik
05-26-2003, 11:51 PM
whenever I do a site chattr command on a file or directory it tells me that the file or directory does not exist and I know it does.
This has happened on Version 4.9.1 - 4.9.3 so this bug has not been found yet.
darkone
05-27-2003, 06:29 AM
Works fine for me
Lunatik
05-27-2003, 08:57 AM
Some of my users are getting this error message.
Maximum concurrent logins for account reached, try again later
and when I do a site who they are not even logged in.
darkone
05-27-2003, 09:06 AM
FTP login & Telnet login max, changed their places in userfiles. Fix:
SITE CHANGE * LOGINS <logins>
Zer0Racer
05-27-2003, 09:07 AM
I tested chattr in the pre-4.9.0 version. Everything worked just fine. Symlink + making it private.
Make sure the user using the link has access to target dir. Or you would get the error msg.
Zer0Racer
05-27-2003, 09:34 AM
About the stats. Yes, there seems to be something wrong with the cookies %[who(UpSpeed)] and %[who(DnSpeed)] in who.foot. Values are switched. DnSpeed shows UpSpeed and the other way around.
200- ___________ ________
200- _______\_ _/__\ /________
200- ° \ / | | | _ /
200- ruz | /\ | | | |
200-+---------------°----|______________\___|_____|_______|------------------------+
200-| ****** / ind | up: 14.9kb/s | %: |
200-| No Tagline Set | since 00:31:08 | f: /requests/Deftones-Deftones |
200-+------------------------------------------------------------------------------+
200-| ****** / crew | idle 00:01:36 | %: |
200-| siteop | since 00:05:28 | p: / |
200-+------------------------------------------------------------------------------+
200-| ****** / friends | dn: 20.8kb/s | %: |
200-| No Tagline Set | since 00:41:58 | f: /mp3/Massive_Attack_-_100th |
200-+------------------------------------------------------------------------------+
200-| Up: 1 / 20.8kbs | Dn: 1 / 14.9kbs | Total: 2 / 35.6kbs |
200-+---------------------------------------------------------------------[ioFTPD]-+
moin
i currently use ioFTPD 4.9.3u
on windows 2000 sp2
hardware
2x p4 xenon
1024 mb rambus
usw...
@high traffic (14mb/s) over 5min+ ioFTPD crashs no error or anything other its ony closed:(
and sometimes i get nice memory writing error msgs;)
cya
darkone
05-27-2003, 12:26 PM
ssl? i couldn't replicate any crashing even with 20threads uploading in non ssl.
darkone
05-27-2003, 12:31 PM
Oops.. unregistered version does not synchronize access to Allocation/Reallocation/Free routines =p no wonder I didn't notice that.. I'll post a patch later tonight
using ioftpd 494u, ioa 079, ioB 16b
seems like io has problems with grp slots
i gave 3 slots and 1 leech slot to NEWGRP
user1 (gadmin of NEWGRP), user2, user3 - they all are from NEWGRP
then sitebot (ioB) tells me:
[15:19:18] (aaa) -:: aaa sysop operation ::- 08-17-2003 15:19:00 'user1' changed Ratio for user 'test1' from '3' to '0' on section '0'.
[15:19:52] (aaa) -:: aaa sysop operation ::- 08-17-2003 15:19:34 'user1' changed Ratio for user 'user2' from '3' to '0' on section '0'.
checked on site with site uinfo and confirmed.
nasty! :)
hope new version will fix it.
regards
vBulletin® v3.8.11 Alpha 3, Copyright ©2000-2024, vBulletin Solutions, Inc.