Site Changes In Middle Of Transfer

[RooDoog]

I loaded windows sp2 last week and now I cannot get a complete folder....skips files. I did not activate the firewall on sp2. How can I get sp2 off of puter?

Error: [R] 227 Entering Passive Mode (209,67,221,138,232,181).
[R] Opening data connection IP: 209.67.221.138 PORT: 59573
[R] Data Socket Error: Connection timed out
[R] Transfer Failed!

version 3.0.2, build 1045
Windows XP sp2
Norton IS 2005 (does not help when firewall is shut down)

[MxxCon]

what exactly are you trying to do?
log you pasted doesn't make any sence.
please post more complete log with skipping any lines.

[RooDoog]

[R] 230 RooDoog logged in successfully.
[R] SYST
[R] 215 UNIX system type.
[R] FEAT
[R] 211-Extensions supported:
[R] MLST type*,x.crc32*,size*,modify*,unix.owner*,unix.grou p*,x.slaves*,x.xfertime*
[R] PRET
[R] CLNT
[R] NOOP
[R] 211 End
[R] CLNT FlashFXP 3.0.1045
[R] 200 Command okay
[R] PWD
[R] 257 "/" is current directory
[R] TYPE A
[R] 200 Command okay
[R] PRET LIST
[R] 200 OK, will use master for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,87,146,196,244).
[R] Opening data connection IP: 216.32.87.146 PORT: 50420
[R] LIST -al
[R] 150 File status okay; about to open data connection.
[R] 226- [Ul: 242.2MB] [Dn: 28.9GB] [Average speed: 38.3MB]
[R] [Credits: 69.8GB] [Ratio: 1:3.0]
[R] 226 Closing data connection
[R] List Complete: 944 bytes in 0.55 seconds (1.7 KB/s)

I am on a router for home. Connection type: 0
Use passive mode, enable ident, ipconfig reflects router ip: 192.168.1.1

I have removed windows xp2 back to windows xp1. About 85% of files transfer but 2-3 will not transfer.

[RooDoog]

I have noticed the IP changes.
Good IP that transfers is: [R] 227 Entering Passive Mode (216,32,88,234,213,244)

This one shows up and files fail to transfer: R] 227 Entering Passive Mode (209,67,221,138,195,109).
Hope this helps,
THX

[Linkster]

Originally posted by RooDoog
I have noticed the IP changes.
Good IP that transfers is: [R] 227 Entering Passive Mode (216,32,88,234,213,244)

This one shows up and files fail to transfer: R] 227 Entering Passive Mode (209,67,221,138,195,109).
Hope this helps,
THX

whoa, that's screwed up. Do you recognize that IP address? is it another server of yours? Is that server possibly multi-homed? maybe xp sp2 is trying to deny what could be a hijack attempt?

[RooDoog]

I removed windows xp2 so that is not it. I have notifed admins of problem, hope to get an answer soon.

[MxxCon]

Originally posted by Linkster
whoa, that's screwed up. Do you recognize that IP address? is it another server of yours? Is that server possibly multi-homed? maybe xp sp2 is trying to deny what could be a hijack attempt? take a look at his log, reply to FEAT command, you'll see PRET command, so that's drftpd, which is as you may know is a distributed server.
the fact that you can download/get dir list from main server but not from that other one, means it's misconfigured.
you'll need to contact server admin.

[RooDoog]

FXP 3.0.2. BUILD 1045
WINDOWS XP SP1 ONLY
USE ROUTER

Well here I go again. When I download a folder certain files in no particular order changes over to a different IP, then files fail.

I have already deleted fxp and dl again with same problem. I have contacted the admin and says the 209 site is NOT his and doesn't belong to anyone in the group. Also there are no empty/bad files. Here is summary of how it goes...hope this help
Please note site ID stays same until #4. Valid site is 216....how do I keep site running without flip flop. This is lengthy but may provide enough info to get fixed:

[R] PRET LIST
[R] 200 OK, will use master for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,87,146,245,49).
[R] Opening data connection IP: 216.32.87.146 PORT: 62769
[R] LIST -al
[R] 150 File status okay; about to open data connection.
[R] 226- [Ul: 242.2MB] [Dn: 30.0GB] [Average speed: 39.7MB]
[R] [Credits: 79.9GB] [Ratio: 1:3.0]
[R] 226 Closing data connection
[R] List Complete: 2 KB in 0.56 seconds (3.7 KB/s)
[R] PRET RETR adws1.sfv
[R] 200 OK, will use Perv01 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,87,146,224,73).
[R] Opening data connection IP: 216.32.87.146 PORT: 57417
[R] RETR adws1.sfv
[R] 150 File status okay; about to open data connection from Perv01.
[R] 226- Checksum from transfer: 7e2697c9
[R] 226 Transfer complete, 683B in 0 seconds (0B/s)
Transferred: adws1.sfv 683 bytes in 0.05 seconds (14.2 KB/s)
[R] CWD /VCD/Alone.In.The.Dark.CAM-WastedSilver/CD1/[ 100% complete ]/
[R] 550 /VCD/Alone.In.The.Dark.CAM-WastedSilver/CD1/[ 100% complete ]/: File not found
[R] TYPE I
[R] 200 Command okay
[R] PRET RETR adws1.r00
[R] 200 OK, will use Perv03 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,90,226,213,33).
[R] Opening data connection IP: 216.32.90.226 PORT: 54561
[R] RETR adws1.r00
[R] 150 File status okay; about to open data connection from Perv03.
[R] 226- Checksum from transfer: 902764bf
[R] 226- checksum from transfer matched checksum in .sfv
[R] 226 Transfer complete, 15.0MB in 38 seconds (394.3KB/s)
Transferred: adws1.r00 14.31 MB in 41.30 seconds (354.7 KB/s)
[R] PRET RETR adws1.r01
[R] 200 OK, will use Perv08 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (64,92,165,74,193,238).
[R] Opening data connection IP: 64.92.165.74 PORT: 49646
[R] RETR adws1.r01
[R] 150 File status okay; about to open data connection from Perv08.
[R] 226- Checksum from transfer: f9e78d96
[R] 226- checksum from transfer matched checksum in .sfv
[R] 226 Transfer complete, 15.0MB in 38 seconds (388.1KB/s)
Transferred: adws1.r01 14.31 MB in 42.09 seconds (348.0 KB/s)
[R] PRET RETR adws1.r02
[R] 200 OK, will use Perv11 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,87,194,216,37).
[R] Opening data connection IP: 216.32.87.194 PORT: 55333
[R] RETR adws1.r02
[R] 150 File status okay; about to open data connection from Perv11.
[R] 226- Checksum from transfer: ee301f36
[R] 226- checksum from transfer matched checksum in .sfv
[R] 226 Transfer complete, 15.0MB in 38 seconds (391.3KB/s)
Transferred: adws1.r02 14.31 MB in 42.19 seconds (347.2 KB/s)
[R] PRET RETR adws1.r03
[R] 200 OK, will use Perv09 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (216,32,88,234,201,31).
[R] Opening data connection IP: 216.32.88.234 PORT: 51487
[R] RETR adws1.r03
[R] 150 File status okay; about to open data connection from Perv09.
[R] 226- Checksum from transfer: cfe09ec3
[R] 226- checksum from transfer matched checksum in .sfv
[R] 226 Transfer complete, 15.0MB in 38 seconds (393.8KB/s)
Transferred: adws1.r03 14.31 MB in 41.33 seconds (354.4 KB/s)
[R] PRET RETR adws1.r04
[R] 200 OK, will use Perv13 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (209,67,221,138,206,117).
[R] Opening data connection IP: 209.67.221.138 PORT: 52853
[R] Data Socket Error: Connection timed out
[R] Transfer Failed!
[R] PRET RETR adws1.r04
[R] 200 OK, will use Perv13 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (209,67,221,138,247,138).
[R] Opening data connection IP: 209.67.221.138 PORT: 63370
[R] Data Socket Error: Connection timed out
[R] Transfer Failed!
[R] PRET RETR adws1.r04
[R] 200 OK, will use Perv13 for upcoming transfer
[R] PASV
[R] 227 Entering Passive Mode (209,67,221,138,205,84).
[R] Opening data connection IP: 209.67.221.138 PORT: 52564

[Linkster]

The FTPD administrator must fix it. This is not a client problem

[MxxCon]

2 threads merged.

this is NOT flashfxp's problem.
SERVER sends you that "wrong" reply.

FlashFXP send command:
[R] PASV
which means, it's asking server to which ip and port it should connect
then server replies with:
[R] 227 Entering Passive Mode(xx,xx,xx,xx,yy,yy)
which tells FlashFXP that info.

now the fact that you are seeing some strange ip, has nothing to do with flashfxp. you would see this with any ftp client you would use.
you are connecting to DrFTPD server. it is designed to be a distributed server "bridging" multiple servers. that's why you are seeing ip that is not belonging to the original site.
now if you/server admin thinks that is wrong, you'll just have to look into it's configuration.
there is absolutly nothing we can do about it.