c00ljim
01-23-2007, 05:01 AM
For some reason when the site im downloading from completes its send, im not getting the eof notification, and the transfers are corrupt..... This is the beganning of a rar transfer, i do not get the progress bar showing me the file is transfering....
[04:40:12] [R] PASV
[04:40:12] [R] 227 Entering Passive Mode (xxx,xxx,xxx,xxx,222,223)
[04:40:12] [L] PORTxxx,xxx,xxx,xxx,222,223
[04:40:12] [L] 200 PORT command successful
[04:40:12] [L] STOR xxxxxxxxxxxx.r00
[04:40:12] [L] 150 Opening BINARY data connection for /xxxxxx/xxxxxxxxxxxxxxxxxxxx.r00 (STREAM)
[04:40:12] [R] RETR xxxxxxxxxxxxxxxxxxxxxx.r00
[04:40:12] [R] 150 Opening BINARY mode data connection for xxxxxxxxxxxxxxxxxxx.r00 (50000000 bytes).
I'm using raidenftpd, and its shows me dl this file.
the status bar, shows time elapsed, but for time remaining there is ?? and for the queue there is ??
Raident shows file has completed, but in the ftp log it shows;
[04:56:10] [R] 226- [Ul: 0.0MB] [Dl: 47.7MB] [Speed: 50.97K/s] [Free: 278692MB]
[04:56:10] [R] 226 [Section: DEFAULT] [Credits: xxxx.8MB] [Ratio: 1:3]
[04:56:11] [L] 226-[sfv] xxxxxxxxxxxx.r00 is bad (BB9B4BD5!=a42fec15).
[04:56:11] [L] 226-[sfv] previously existed sfv file is loaded (0/43 done).
[04:56:11] [L]
on to file number 1:
[04:56:11] [L] 226-[Ul: 1319261.76MB] [Dl: 31227.25MB] [Credits: UnlimitedMB]
[04:56:11] [L] 226-[Ratio: Unlimited] [Speed: 52KB/s] [Space: 106148MB]
[04:56:11] [L] 226 Transfer finished successfully. Data connection closed.
[04:56:11] Transferred: xxxxxxxxxxxx.r00 47.68 MB in 15 minutes 59 seconds (50.9 KB/s)
[04:56:11] [R] PASV
[04:56:11] [R] 227 Entering Passive Mode (xxx,xxx,xxx,xxx,224,121)
[04:56:11] [L] PORT xxx,xxx,xxx,xxx,224,121
[04:56:12] [L] 200 PORT command successful
[04:56:12] [L] STOR xxxxxxxxxxxxx.r01
[04:56:12] [L] 150 Opening BINARY data connection for /xxxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxx/xxxxxxxxxxx.r01 (STREAM)
[04:56:12] [R] RETR xxxxxxxxxxxx.r01
[04:56:12] [R] 150 Opening BINARY mode data connection for xxxxxxxxxxxx.r01 (50000000 bytes).
[05:13:09] [R] 226- [Ul: 0.0MB] [Dl: 95.4MB] [Speed: 48.03K/s] [Free: 278318MB]
[05:13:09] [R] 226 [Section: DEFAULT] [Credits: xxxx.1MB] [Ratio: 1:3]
[05:13:10] [L] 226-[sfv] xxxxxxxxxxxx.r01 is bad (BF446222!=a3e19c59).
[05:13:10] [L] 226-[sfv] previously existed sfv file is loaded (0/43 done).
[05:13:10] [L]
[05:13:10] [L] 226 Transfer finished successfully. Data connection closed.
[05:13:10] Transferred: xxxxxxxxxxx.r01 47.68 MB in 16 minutes 57 seconds (48.0 KB/s)
[05:13:10] [L] TYPE A
[05:13:10] [L] 200 Type set to ASCII.
[05:13:10] [L] MODE Z
[05:13:10] [L] 200 MODE set to ZLIB.
[05:13:10] [L] PASV
[05:13:10] [L] 227 Entering Passive Mode (xxx,xxx,xxx,,61,0,81)
[05:13:10] [L] Opening data connection IP: xxx.xxx.xxx.61 PORT: 81
[05:13:10] [L] LIST -al
[05:13:10] [L] 150 Opening ZLIB data connection for ls /xxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx.
[05:13:10] [L] 226-[mode z ratio] 92.50% (570/7598 bytes).
[05:13:10] [L] 226-free disk space under this directory : 106148 gb
[05:13:10] [L] 226-
[05:13:10] [L] 226 Transfer finished successfully. Data connection closed .
[05:13:10] [L] List Complete: 7 KB in 0.25 seconds (29.0 KB/s)
[05:13:10] [R] TYPE A
[05:13:10] [R] 200 Type set to A.
[05:13:10] [R] STAT -la
[05:13:11] [R] List Complete: 3 KB in 0.49 seconds (7.6 KB/s)
[05:13:11] Transfer queue completed
[05:13:11] Transferred 2 files totaling 95.37 MB in 32 minutes 59 seconds (49.4 KB/s)
[05:13:53] [L] PASV
[05:13:53] [L] 227 Entering Passive Mode (xxx,xxx,xxx,61,0,81)
[05:13:53] [L] Opening data connection IP: xxx.xxx.xxx.61 PORT: 81
[05:13:53] [L] LIST -al
[05:13:53] [L] 150 Opening ZLIB data connection for ls /xxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxx.
[05:13:53] [L] 226-[mode z ratio] 92.50% (570/7598 bytes).
[05:13:53] [L] 226-free disk space under this directory : 106148 gb
[05:13:53] [L] 226-
[05:13:53] [L] 226 Transfer finished successfully. Data connection closed .
[05:13:53] [L] List Complete: 7 KB in 0.09 seconds (77.9 KB/s)
[04:40:12] [R] PASV
[04:40:12] [R] 227 Entering Passive Mode (xxx,xxx,xxx,xxx,222,223)
[04:40:12] [L] PORTxxx,xxx,xxx,xxx,222,223
[04:40:12] [L] 200 PORT command successful
[04:40:12] [L] STOR xxxxxxxxxxxx.r00
[04:40:12] [L] 150 Opening BINARY data connection for /xxxxxx/xxxxxxxxxxxxxxxxxxxx.r00 (STREAM)
[04:40:12] [R] RETR xxxxxxxxxxxxxxxxxxxxxx.r00
[04:40:12] [R] 150 Opening BINARY mode data connection for xxxxxxxxxxxxxxxxxxx.r00 (50000000 bytes).
I'm using raidenftpd, and its shows me dl this file.
the status bar, shows time elapsed, but for time remaining there is ?? and for the queue there is ??
Raident shows file has completed, but in the ftp log it shows;
[04:56:10] [R] 226- [Ul: 0.0MB] [Dl: 47.7MB] [Speed: 50.97K/s] [Free: 278692MB]
[04:56:10] [R] 226 [Section: DEFAULT] [Credits: xxxx.8MB] [Ratio: 1:3]
[04:56:11] [L] 226-[sfv] xxxxxxxxxxxx.r00 is bad (BB9B4BD5!=a42fec15).
[04:56:11] [L] 226-[sfv] previously existed sfv file is loaded (0/43 done).
[04:56:11] [L]
on to file number 1:
[04:56:11] [L] 226-[Ul: 1319261.76MB] [Dl: 31227.25MB] [Credits: UnlimitedMB]
[04:56:11] [L] 226-[Ratio: Unlimited] [Speed: 52KB/s] [Space: 106148MB]
[04:56:11] [L] 226 Transfer finished successfully. Data connection closed.
[04:56:11] Transferred: xxxxxxxxxxxx.r00 47.68 MB in 15 minutes 59 seconds (50.9 KB/s)
[04:56:11] [R] PASV
[04:56:11] [R] 227 Entering Passive Mode (xxx,xxx,xxx,xxx,224,121)
[04:56:11] [L] PORT xxx,xxx,xxx,xxx,224,121
[04:56:12] [L] 200 PORT command successful
[04:56:12] [L] STOR xxxxxxxxxxxxx.r01
[04:56:12] [L] 150 Opening BINARY data connection for /xxxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxx/xxxxxxxxxxx.r01 (STREAM)
[04:56:12] [R] RETR xxxxxxxxxxxx.r01
[04:56:12] [R] 150 Opening BINARY mode data connection for xxxxxxxxxxxx.r01 (50000000 bytes).
[05:13:09] [R] 226- [Ul: 0.0MB] [Dl: 95.4MB] [Speed: 48.03K/s] [Free: 278318MB]
[05:13:09] [R] 226 [Section: DEFAULT] [Credits: xxxx.1MB] [Ratio: 1:3]
[05:13:10] [L] 226-[sfv] xxxxxxxxxxxx.r01 is bad (BF446222!=a3e19c59).
[05:13:10] [L] 226-[sfv] previously existed sfv file is loaded (0/43 done).
[05:13:10] [L]
[05:13:10] [L] 226 Transfer finished successfully. Data connection closed.
[05:13:10] Transferred: xxxxxxxxxxx.r01 47.68 MB in 16 minutes 57 seconds (48.0 KB/s)
[05:13:10] [L] TYPE A
[05:13:10] [L] 200 Type set to ASCII.
[05:13:10] [L] MODE Z
[05:13:10] [L] 200 MODE set to ZLIB.
[05:13:10] [L] PASV
[05:13:10] [L] 227 Entering Passive Mode (xxx,xxx,xxx,,61,0,81)
[05:13:10] [L] Opening data connection IP: xxx.xxx.xxx.61 PORT: 81
[05:13:10] [L] LIST -al
[05:13:10] [L] 150 Opening ZLIB data connection for ls /xxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx.
[05:13:10] [L] 226-[mode z ratio] 92.50% (570/7598 bytes).
[05:13:10] [L] 226-free disk space under this directory : 106148 gb
[05:13:10] [L] 226-
[05:13:10] [L] 226 Transfer finished successfully. Data connection closed .
[05:13:10] [L] List Complete: 7 KB in 0.25 seconds (29.0 KB/s)
[05:13:10] [R] TYPE A
[05:13:10] [R] 200 Type set to A.
[05:13:10] [R] STAT -la
[05:13:11] [R] List Complete: 3 KB in 0.49 seconds (7.6 KB/s)
[05:13:11] Transfer queue completed
[05:13:11] Transferred 2 files totaling 95.37 MB in 32 minutes 59 seconds (49.4 KB/s)
[05:13:53] [L] PASV
[05:13:53] [L] 227 Entering Passive Mode (xxx,xxx,xxx,61,0,81)
[05:13:53] [L] Opening data connection IP: xxx.xxx.xxx.61 PORT: 81
[05:13:53] [L] LIST -al
[05:13:53] [L] 150 Opening ZLIB data connection for ls /xxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxx.
[05:13:53] [L] 226-[mode z ratio] 92.50% (570/7598 bytes).
[05:13:53] [L] 226-free disk space under this directory : 106148 gb
[05:13:53] [L] 226-
[05:13:53] [L] 226 Transfer finished successfully. Data connection closed .
[05:13:53] [L] List Complete: 7 KB in 0.09 seconds (77.9 KB/s)