Server to server

[tin68]

I tried to make a date transmission from server to server - but this doesn't work... "Connection refused".

Any help? Or did I miss something in configuration?

Forgot to add:

* FlashFXP v[ 3].[ 4], build [1140 ], [x ]registered, [ ]unregistered, [ ]pirated
* OS [ ] WinXP, [ ] Win2K, [x ] Win98, [ ] WinME, [ ] Other
* Running behind NAT/router [ x] Yes & Model [ ], [ ] No, [ ] Not sure
* Running firewall [ ] Yes, Name [ ], Ver. [ ], or [x] No
* Running Antivirus [x ] Yes, Name [ ] or [ ] No
* Network [x] xDSL, [ ] CABLE, [ ] Dail-Up, [ ] Other

[MxxCon]

win98? :/
need to see actual session log. "connection refused" is not helpful at all.

[tin68]

Ok.

I connected to both servers and then I tried to transver folder "div" from server tin to server tin-2. The folder seems to be created - but files can't be transfered.

http://home.tiscali.ch/mynewsgroup/s2s001.txt

[MxxCon]

in site manager, enable alternative fxp and try again.

[tin68]

Well, I tried - but I got the same result.

The folders are made - but the files can't be transported.

WinSock 2.0 -- OpenSSL 0.9.8b 04 May 2006
[L] Connecting to tin1 -> DNS=XXX IP=XXXX PORT=21
[L] Connected to tin1
[L] 220 FTP Server ready.
[L] USER XXX
[L] 331 Password required for XXX.
[L] PASS (hidden)
[L] 230 User XXX logged in.
[L] SYST
[L] 215 UNIX Type: L8
[L] FEAT
[L] 500 FEAT not understood.
[L] REST 100
[L] 350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer
[L] REST 0
[L] 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
[L] CWD html
[L] 250 CWD command successful.
[L] PWD
[L] 257 "/html" is current directory.
[L] TYPE A
[L] 200 Type set to A.
[L] PASV
[L] 227 Entering Passive Mode ().
[L] Opening data connection IP: XXX PORT: 50990
[L] LIST
[L] 150 Opening ASCII mode data connection for file list
[L] 226 Transfer complete.
[L] List Complete: 1 KB in 0.23 seconds (6.5 KB/s)
[R] Connecting to tin2 -> DNS=XXX IP=XXX PORT=21
[R] Connected to tin2
[R] 220 ProFTPD 1.2.10 Server (ProFTPD) [XXX]
[R] USER XXX
[R] 331 Password required for tin.
[R] PASS (hidden)
[R] 230 User XXX logged in.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Features:
[R] MDTM
[R] REST STREAM
[R] SIZE
[R] 211 End
[R] PWD
[R] 257 "/" is current directory.
[R] TYPE A
[R] 200 Type set to A
[R] PASV
[R] 227 Entering Passive Mode (XXX).
[R] Opening data connection IP: XXX PORT: 44905
[R] LIST -al
[R] 150 Opening ASCII mode data connection for file list
[R] 226-Transfer complete.
[R] 226 Quotas off
[R] List Complete: 1 KB in 0.12 seconds (9.4 KB/s)

...useless fluff trimmed...

[R] PASV
[R] 227 Entering Passive Mode (XXX).
[L] PORT XXX
[L] 200 PORT command successful
[R] STOR delphi-basics.html
[L] RETR delphi-basics.html
[L] 425 Unable to build data connection: Connection refused
[L] ABOR
[L] 226 Abort successful

[MxxCon]

now that you completly edited out ip from your 2nd log, it makes it extremely hard to be sure if you properly enabled alternative fxp...but from what i can see, you have not since in both cases you have
[R] PASV
[R] 227 Entering Passive Mode
[L] PORT
[L] 200 PORT command successful with properly configured alternative fxp, your [L] site would get PASV and your [R] site would get PORT

[tin68]

So could you please tell me exactly what I have to set in the configuration of every site when using "alternative fxp"?

I see two options in transfer menu - "alternative site to site method"

- Downloading (NOT PASV)
- Uploading (PASV)

How I have to set them for source and target server?

Thanks.

Update: I set all the options in this menu and tried again:

http://home.tiscali.ch/mynewsgroup/s2s002.txt

[MxxCon]

on your [R] site you should check 'downloading' box
on your [L] site you should check 'uploading' box

[tin68]

Thanks - but after the first file transfer is stopped - nothing goes - in queue all files to transfer are still there.

http://home.tiscali.ch/mynewsgroup/s2s003.txt

[tin68]

So there is no chance to get it to work?