A couple of things to try.
Try configuring the server to use a set range of ports for passive connections, and make sure this same range is appropriately configured in any router/firewall.
If passive simply wont work (it may be something on your Uni network configuration causing it) then use active mode (PORT). Both flashfxp and your server software will have configuration options regarding this, on the client side you can fiddle with the active mode ip/port range setting, and on the server side you can set the server to allow fxp or 'ftp bounce' as some servers call it. It is currently not allowed by your server which is why you are getting the "530 PORT command only accepts client IP address (130.225.184.23!=172.21.187.206)." error.
|