Ok I have 5 Files.
After the 1 File transfer it relog and then transfer the 2 File and then after it finish it will re-connect again and transfer 3 file and so on. (Its also the same as downloading) if you dont know what im talking about...
Code:
[R] 227 Entering Passive Mode (64,72,116,195,253,235)
[R] Opening data connection IP: 64.72.116.195 PORT: 65003
[R] STOR stat3.gif
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.318 seconds (measured here), 330.47 bytes per second
Transferred: stat3.gif 105 bytes in 0.33 seconds (0.3 KB/s)
[R] TYPE I
[R] 200 TYPE is now 8-bit binary
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,243,142)
[R] Opening data connection IP: 64.72.116.195 PORT: 62350
[R] STOR stat4.gif
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.315 seconds (measured here), 330.67 bytes per second
Transferred: stat4.gif 104 bytes in 0.31 seconds (0.3 KB/s)
[R] CWD /1/templates/vista
[R] 250 OK. Current directory is /1/templates/vista
[R] PWD
[R] 257 "/1/templates/vista" is your current location
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,235,175)
[R] Opening data connection IP: 64.72.116.195 PORT: 60335
[R] STOR block.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.313 seconds (measured here), 0.66 Kbytes per second
Transferred: block.php 215 bytes in 0.33 seconds (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,251,254)
[R] Opening data connection IP: 64.72.116.195 PORT: 64510
[R] STOR footer.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.339 seconds (measured here), 3.74 Kbytes per second
Transferred: footer.php 1 KB in 0.36 seconds (3.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,252,70)
[R] Opening data connection IP: 64.72.116.195 PORT: 64582
[R] STOR header.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.645 seconds (measured here), 6.39 Kbytes per second
Transferred: header.php 4 KB in 0.66 seconds (6.4 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,240,199)
[R] Opening data connection IP: 64.72.116.195 PORT: 61639
[R] STOR id.php
[R] 150 Accepted data connection
[R] 226-6560 Kbytes used (0%) - authorized: 5242880 Kb
[R] 226-File successfully transferred
[R] 226 0.788 seconds (measured here), 1.01 Kbytes per second
Transferred: id.php 841 bytes in 0.41 seconds (2.0 KB/s)
[R] CWD /1/templates/vista/extra
[R] 250 OK. Current directory is /1/templates/vista/extra
[R] PWD
[R] 257 "/1/templates/vista/extra" is your current location
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,252,108)
[R] Opening data connection IP: 64.72.116.195 PORT: 64620
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 0.66 seconds (1.1 KB/s)
Transfer queue completed
Transferred 142 files totaling 556 KB in 5 minutes 26 seconds (6.3 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,243,154)
[R] Opening data connection IP: 64.72.116.195 PORT: 62362
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.06 second (0.7 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,254,108)
[R] Opening data connection IP: 64.72.116.195 PORT: 65132
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,251,132)
[R] Opening data connection IP: 64.72.116.195 PORT: 64388
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,240,151)
[R] Opening data connection IP: 64.72.116.195 PORT: 61591
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.20 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,253,19)
[R] Opening data connection IP: 64.72.116.195 PORT: 64787
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.20 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,249,63)
[R] Opening data connection IP: 64.72.116.195 PORT: 63807
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.27 second (0.6 KB/s)
[R] TYPE A
[R] 200 TYPE is now ASCII
[R] PASV
[R] 227 Entering Passive Mode (64,72,116,195,255,166)
[R] Opening data connection IP: 64.72.116.195 PORT: 65446
[R] LIST -al
[R] 150 Accepted data connection
[R] 226-Options: -a -l
[R] 226 11 matches total
[R] List Complete: 719 bytes in 1.23 second (0.6 KB/s)
Look how many times it re-connect to the server after the file has been transfered. Not other FTP do this -.-
- WHat im trying to say is that those files are in Transfer Qeue (Ready to be transfer)How come it has to re-connect all the time? just take a look. It re-connect after file had been transfered -.- Isnt that wierd.