FlashFXP Forums - View Single Post

Mr_X · 11-26-2005, 02:44 PM

I was running ioftpd on gigabit lan and i still run it on gbit and it works fine. I get about 23Megs/sec and the max I got was 43Megs/sec (both computers have Maxtor 80Gb 2Mb Cache PATA and were connected with a Cross cable).
Maybe it's a firewall issue (depends on your network, you should give a little bit more informations about it).
You should also check:
- Using STP (Shielded)
- Packet loss (with ethereal for example)
- If your cables are ok (On 3Com/Marvell/Yukon Gigabit, there's an utility for that: VCT)
- Try with ioftpd 5.8.5r
- You're not using 100Mbit switch

11-26-2005, 02:44 PM
Mr_X Senior Member Join Date: Sep 2003 Posts: 142	I was running ioftpd on gigabit lan and i still run it on gbit and it works fine. I get about 23Megs/sec and the max I got was 43Megs/sec (both computers have Maxtor 80Gb 2Mb Cache PATA and were connected with a Cross cable). Maybe it's a firewall issue (depends on your network, you should give a little bit more informations about it). You should also check: - Using STP (Shielded) - Packet loss (with ethereal for example) - If your cables are ok (On 3Com/Marvell/Yukon Gigabit, there's an utility for that: VCT) - Try with ioftpd 5.8.5r - You're not using 100Mbit switch